post

Guidelines On Creating Safe Environment At Workplace

by Posted in Default, Teknologi

The issue of occupational safety or workplace safety should not be taken lightly by employers and employees. Regardless of the type of businesses you are venturing into,  safety is the first matter that should always be prioritized among employers and employees. We have seen the soaring cases of occupational accidents involving the employees at the workplace although the company, bosses and employees have done their best to ensure safety is prioritized by conducting the professional training on operating machineries, installing PATLITE signal tower Malaysia and many more, but the accident could not be avoided. In this article, we would like to share general guidelines on creating a safe environment at the workplace that are suitable to apply at any type of workplace. 

Clean Air At The Workplace

Breathing polluted air at the workplace can cause health problems related to respiratory systems such as asthma and coughing. The usual contaminants in the air that can be identified as the contributors to health problems are bacteria, viruses, mould spores, dusts, solvent vapours, chemicals generated or used in the building. If you are opting for air conditioning as the way to produce fresh air at the workplace for everyone’s health, unfortunately this way is not effective. The way to maintain clean and fresh air at the workplace will be better if there is appropriate and regular maintenance for reducing air contamination at the workplace after installing  the air conditioning. Below are the measures to ensure clean air by Department of Occupational Safety and Health, Ministry of Human Resources Malaysia (1996): 

  • Effective air filtration,
  • Ensuring that adequate amounts of fresh air enter the building,
  • Maintenance of air conditioning units including regular cleaning,
  • Preventing the obstruction of vent,
  • Locating equipment using solvents in room temperature areas or in non-air conditioned areas with substantial air movement and/or installing local exhaust ventilation.

Emergency Exits And Equipment 

As the employer, you should ensure the building that your employees work in, has the emergency exits and safety equipment at every unit of building, for example, fire extinguishers. Then, conduct a mock training with the nearby Department of Firefighters to train other colleagues and employees the safety measures that should be taken, explain and guide them clearly to exit the emergency doors with provided routes. By showing them the relevant exits, both physically and by the clear signages that display ‘’emergency exits’’, you are putting the safety of your colleagues and employees first. Make sure that the emergency routes are clear and adhere to building codes that first aid kits and emergency equipment such as fire extinguishers (make sure it’s not vandalised) and public access defibrillators are present, and that employees know how to work them.

Installing PATLITE Signal Tower At The Workplace

PATLITE signal tower Malaysia

The installation of a PATLITE signal tower at the workplace is strongly recommended especially at workplaces that require heavy loads of work and involvement of machines. PATLITE signal tower will deliver information communication that enables appropriate actions to be taken at call centers, control rooms, and other information control centers. This signal tower will help to indicate the existence of incoming calls, system errors that occur at the workplaces immediately at call centers and other facilities. Besides that, PATLITE signal tower enables quick recognition of malfunctions at remote locations. Therefore, all employers and employers will be aware of the current situations and can inspect as fast as possible the cause of malfunctions of certain machines. 

PATLITE signal tower Malaysia

Further interesting matter about the PATLITE signal tower is that it could help to lower the risk and prevent occupational accidents involving construction machinery, and other accidents occurring at hazardous locations such as construction sites. PATLITE signal tower will assist you by mitigating the effects of blind spots on big construction vehicles and machines with the use of LED beacons and other alarm devices. If the PATLITE signal tower has loud-voice synthezisers, it will help employees are aware of alarms even on noisy construction sites. 

We hope these three (3) general guidelines will help you to initiate the realisation of creating a safe work environment at the workplaces. Stay safe and put safety as the top priority. 

post

Get to Know About Safety in the Laboratory

by Posted in Default Tagged ,

Biology is the study of living things and their places in the world. So, everything that has to do with this field of science must be closely related to these two things. Biology is also the same thing as labs. This seems to be true because most scientific research and observations of objects are done in the lab.

When working in the lab, a researcher has to pay attention to both the scientific method and the safety of the work environment. Here are some things to remember when working in the lab.

SAFETY SIGNS FOR WORKERS

The safety symbol is the first thing you need to know about workplace safety in a biology lab. Most chemicals have these symbols on them.

The goal is to keep everyone in the lab, including researchers, safe. Here is a picture of a chemical symbol that you need to know.

Here is a description of what the safety signs in the lab mean. 

1. Flammable. The first symbol looks like a fire and says “flammable.” This fire symbol can be used to label chemicals like alcohol, ketones, and ethyne gas.

To deal with chemicals that can catch fire, keep them away from sparks or metals that can transfer heat.

2. Explosive. An explosion is a symbol of chemicals that can cause an explosion. Atomium dichromate and nitrocellulose are both chemicals that can be used to make explosives.

To take care of these chemicals, you should keep them in a place that is damp and keep them away from heat or other sources of ignition. Also, make sure the material doesn’t get hit or rubbed against anything.

3. Toxic and carcinogenic. In the next laboratory, the safety sign is a picture of a skull and bones. This symbol means that the chemical is dangerous and could cause cancer. Mercury, cyanide, phenol, and sulfuric acid gas are all chemicals that belong to this group. You shouldn’t swallow, breathe in, or put these things on your skin. Also, make sure you don’t come into direct contact with these chemical fumes while you’re in the lab.

4. Causes irritation and poisoning.  Chemicals that can irritate the skin or kill you usually have a black cross on them. Chloroform, sodium hydroxide, but alone, bromine vapour, hydrogen peroxide, and chlorine gas are some of these chemicals. When you’re working in the lab and using these chemicals, make sure the fumes don’t touch your skin, get in your mouth, or go up your nose.

5. Corrosive. Chemical droplets that are corrosive are usually drawn by hand and made with iron. Not only can these things cause rust, but they can also hurt you if you touch them without gloves. To deal with chemicals, keep them away from tools made of metal that rust easily. Also, make sure the material doesn’t come in direct contact with the skin.

6. Radioactive.  The next safety sign in the lab is for chemicals that are radioactive. Most of these things are marked with a windmill-shaped picture. Uranium, plutonium, thorium, and actinium are just a few of these chemicals. Radioactive chemicals should be kept in thick bottles with tight-fitting caps. Also, make sure this material doesn’t come in direct contact with the body.

You might need a shelf or storage cabinet to make sure the chemicals are in the right place. To get the best lab furniture, you can place an order at MDC. Click lab furniture manufacturers malaysia.

101 Basics of Automation Components

by Posted in Default
OMRON Automation Component Malaysia

An automation system is a collection of sensors, controls, and actuators that work together to perform a task with little or no human intervention. This subject is concerned with Mechatronics, which is an interdisciplinary branch of engineering that combines mechanical, electrical, and electronic systems. Click here to learn more on OMRON Automation Component Malaysia.

The majority of automation systems are derived from manual processes such as drilling, cutting, and welding. These systems employ robotic arms to control the movement of the tool performing the original function. Automation is used in other applications, particularly in the field of process control, to monitor and control process parameters. This is accomplished by adjusting the operation of equipment such as heaters, motors, pumps, and compressors, or by opening or closing process lines with control valves. Automation systems are available in a variety of configurations, even for a single function. The following are the most common applications for automation systems such as assembling, milling, cutting, drilling and many others.

The primary goal of an automation system is to reduce the need for human intervention. A human operator is prone to mistakes and fatigue, which can result in a variety of issues. Adapting an automation system will result in significant improvements in profit, production rate, safety, and quality. The benefits of using automation systems are listed below.

OMRON Automation Component Malaysia

Advantages:

  • More Consistent Production: When designed correctly, robotic systems can reduce production time by performing complex movements efficiently. A higher production rate translates to a higher production volume and a higher profit. To achieve faster actions, the driver must supply sufficient force, and the flow of movement of the links and joints must be smooth, with no unnecessary transitions. Furthermore, a computer’s processing speed is faster and more efficient than that of humans. Humans can process more complex information than computers, but computers outperform when human error, breaks, and sick days are factored in.
  • Increased Repeatability: A production line is efficient due to the repeated sequence of movements that are “programmed” to the operator doing the work. This requires little decision making because the actions are mostly governed by a predetermined, specific set of instructions. These repetitive movements can be broken down into simple translations and rotations that a robot can learn. The actuators’ repeatability is improved because they have a nearly constant range of motion.
  • Precision and Accuracy: As previously stated, the actuators are designed to perform constant-range movements. Unless there is a feedback signal or a change in the control variables, the characteristics of an actuator’s movement will not change. The automation system can be calibrated to produce the same result with little or no variation.
OMRON Automation Component Malaysia
  • Product Quality is Improved: With automated systems, products are created with consistency. Human error and subjective judgement errors are avoided. Automated systems use logic to determine whether a given condition yields the desired result. Constant verification can be accomplished with feedback systems that outperform humans.
  • Improved Working Conditions: Processes that involve extreme temperatures, high pressures, high forces, rapid movements, and toxic materials endanger personnel. Robots can now perform dangerous tasks without causing injury or even death.
post

Apply For Pre-U Science Courses in Malaysia Today!

by Posted in Default Tagged , , ,

Are you just done with your high school and are now considering furthering your studies in tertiary studies? Well, look no further because you can start applying for pre-u courses today! There are a few courses available to choose from, and if you feel like pursuing Form 6 is daunting to you, then you can opt to apply for pre-u, or in other terms, foundation courses. However, if you’re considering taking pre-u science courses in Malaysia, then here are some things you need to know about science courses in Malaysia.

pre-u science courses in Malaysia

What is a pre-u science course?

Pre-u science course is a course that prepares you for Uni, meaning you will be exposed to the basic foundation of science before heading off to continue your bachelor’s degree. In a pre-u science course, you will be exposed to the basic sciences like physics, chemistry, biology, and mathematics. You will also be learning other subjects like IT and business studies during your time in the pre-u science course as well. 

Why should I pursue a pre-u science course?

There are several reasons why you should consider pursuing a pre-u science course if you’re interested to be part of the STEM field. Here is a list of reasons why pursuing a pre-u science course is worth it:

Improve self-confidence and multiple skills

In pre-u, you will learn and will be exposed to the fundamental subjects you need to know in a science course. Therefore, when you learn all these fundamental subjects, you automatically get to sharpen your skills, as well as your self-confidence in all the knowledge you absorb throughout your time in pre-u. Hence, when you are well-equipped with these prior skills and knowledge, you will be able to expand and grow much easier once you pursue your bachelor’s degree later on. 

pre-u science courses in Malaysia

A smooth transition to your degree life

As aforementioned, fundamental skills and knowledge contribute to faster knowledge and skill growth when you apply for a bachelor’s degree in the future. Also, by pursuing a pre-u science course, you are able to adapt and transition yourself to a bachelor’s degree as you possess the prior knowledge and skills needed. 

When you are able to transition smoothly into your bachelor’s degree, that means learning and gaining skills becomes more familiar instead of awkward. Then, you will be able to apply what you have learned during your pre-u into your bachelor’s degree too.

Getting a head start on your Degree

Pursuing a pre-u science course also provides a head start on your degree. You do this by exposing yourself to the lessons and skills learned throughout your pre-u courses, that way it will not feel too awkward or bizarre for you when you enter a bachelor’s degree in the future. Other than getting a head start, you will also be able to consider a more specific science field in which you would want to pursue your bachelor’s degree. 

Of course, you can keep pursuing general science in a bachelor’s like how you did for your pre-u course, however, you might discover that you are more interested in a niche field while doing your pre-u. Therefore, you are also able to get good career prospects too, since you possess multiple general skills in the field. 

So, what are you waiting for? If you have done much consideration of the matter, then you start applying for pre-u science courses to kick start your career in the STEM field.